All American Surface Mount - Recessed Flow Control - Exotic Wood Species

American Made Wood Registers are made with you in mind, taking into account many moods, personalities and flexible application needs. All horizontal slot registers and grilles are cut from a single piece of solid wood; no glued joints to dry out, loosen or crack. No glue joints mean no areas of uneven staining or finishing.

If the register cover is to be painted to match a wall, vinyl, carpeting, or ceramin, it is suggested to use a Poplar or Maple with a closed grain. Both Red Oak and White Oak has an open grain that will "pop" and come through the paint.

• Dimensions listed are for the duct work size.
• Register covers are unfinished.
• Screw holes and screws not included.

Mount Options:

• Surface mount models sit atop the floor and simply drop into the duct opening, and is used as any standard metal register would be. Sometimes referred to as "drop", "drop-in", "self-rimming", or "roundover."

• Flush mount (with frame) registers nest in a frame assembly to make vacuuming and sweeping easier. They are easily installed: Just position the frame over the duct opening, glue and nail in place, and butt the flooring to the frame.

Flow Control Regulator: Also referred to as a damper box. Not available on 8x sizes.

• No Flow Control is just that, no flow control.
  
• The Recessed Air Flow Control is made available for use in flooring applications, and aid the installer in the sanding operation, protect the end user from injury by accidentally stepping on the control, and protect the control from damage. The thumb wheel control is slightly recessed into the face of of the register, and is still accessible from the top.