American Made Wood Registers are made with you in mind, taking into
account many moods, personalities and flexible application needs.
All horizontal slot registers and grilles are cut from a single piece
of solid wood; no glued joints to dry out, loosen or crack. No glue
joints mean no areas of uneven staining or finishing.
If the register cover is to be painted to match a wall, vinyl,
carpeting, or ceramin, it is suggested to use a Poplar or Maple with a
closed grain. Both Red Oak and White Oak has an open grain that will
"pop" and come through the paint.
- Dimensions listed are for the duct work size.
- Register covers are unfinished.
- Screw holes and screws not included.
Surface mount models sit atop
the floor and simply drop into the duct opening, and is used as any
standard metal register would be. Sometimes referred to as "drop",
"drop-in", "self-rimming", or "roundover."
(with frame) registers nest in a frame assembly to make vacuuming and
sweeping easier. They are easily installed: Just position the frame
over the duct opening, glue and nail in place, and butt the flooring to
Flow Control Regulator: Also referred to as a damper box. Not available on 8x sizes.
- No Flow Control is just that, no flow control.
- The Recessed Air Flow Control
is made available for use in flooring applications, and aid the
installer in the sanding operation, protect the end user from injury by
accidentally stepping on the control, and protect the control from
damage. The thumb wheel control is slightly recessed into the face of
of the register, and is still accessible from the top.
This product was added to our catalog on Wednesday 25 June, 2008.